javax.swing
Class JViewport

java.lang.Object
  |
  +--java.awt.Component
        |
        +--java.awt.Container
              |
              +--javax.swing.JComponent
                    |
                    +--javax.swing.JViewport

All Implemented Interfaces:

Accessible, ImageObserver, MenuContainer, Serializable

public class JViewport

extends JComponent

implements Accessible

The "viewport" or "porthole" through which you see the underlying information. When you scroll, what moves is the viewport. It is like peering through a camera's viewfinder. Moving the viewfinder upwards brings new things into view at the top of the picture and loses things that were at the bottom.

By default, JViewport is opaque. To change this, use the setOpaque method.

NOTE:We have implemented a faster scrolling algorithm that does not require a buffer to draw in. The algorithm works as follows:

1. The view and parent view and checked to see if they are JComponents, if they aren't, stop and repaint the whole viewport.
2. If the viewport is obscured by an ancestor, stop and repaint the whole viewport.
3. Compute the region that will become visible, if it is as big as the viewport, stop and repaint the whole view region.
4. Obtain the ancestor Windows graphics and do a copyArea on the scrolled region.
5. Message the view to repaint the newly visible region.
6. The next time paint is invoked on the viewport, if the clip region is smaller than the viewport size a timer is kicked off to repaint the whole region.

In general this approach is much faster. Compared to the backing store approach this avoids the overhead of maintaining an offscreen buffer and having to do two copyAreas. Compared to the non backing store case this approach will greatly reduce the painted region.

This approach can cause slower times than the backing store approach when the viewport is obscured by another window, or partially offscreen. When another window obscures the viewport the copyArea will copy garbage and a paint event will be generated by the system to inform us we need to paint the newly exposed region. The only way to handle this is to repaint the whole viewport, which can cause slower performance than the backing store case. In most applications very rarely will the user be scrolling while the viewport is obscured by another window or offscreen, so this optimization is usually worth the performance hit when obscured. Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. A future release of Swing will provide support for long term persistence.

See Also:

JScrollPane, Serialized Form

Inner Class Summary

protected class	JViewport.AccessibleJViewport This class implements accessibility support for the JViewport class.
protected class	JViewport.ViewListener A listener for the view.

Inner classes inherited from class javax.swing.JComponent

JComponent.AccessibleJComponent

Inner classes inherited from class java.awt.Container

Container.AccessibleAWTContainer

Inner classes inherited from class java.awt.Component

Component.AccessibleAWTComponent

Field Summary

protected boolean	backingStore Deprecated. As of Java 2 platform v1.3
static int	BACKINGSTORE_SCROLL_MODE Draws viewport contents into an offscreen image.
protected Image	backingStoreImage The view image used for a backing store.
static int	BLIT_SCROLL_MODE Use graphics.copyArea() to implement scrolling.
protected boolean	isViewSizeSet True when the viewport dimensions have been determined.
protected Point	lastPaintPosition The last viewPosition that we've painted, so we know how much of the backing store image is valid.
protected boolean	scrollUnderway The scrollUnderway flag is used for components like JList.
static int	SIMPLE_SCROLL_MODE This mode uses the very simple method of redrawing the entire contents of the scrollpane each time it is scrolled.

Fields inherited from class javax.swing.JComponent

accessibleContext, listenerList, TOOL_TIP_TEXT_KEY, ui, UNDEFINED_CONDITION, WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, WHEN_FOCUSED, WHEN_IN_FOCUSED_WINDOW

Fields inherited from class java.awt.Component

BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT

Fields inherited from interface java.awt.image.ImageObserver

ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

Constructor Summary

JViewport()
Creates a JViewport.

Method Summary

void	addChangeListener(ChangeListener l) Adds a ChangeListener to the list that is notified each time the view's size, position, or the viewport's extent size has changed.
protected void	addImpl(Component child, Object constraints, int index) Sets the JViewports one lightweight child, which can be null.
protected boolean	computeBlit(int dx, int dy, Point blitFrom, Point blitTo, Dimension blitSize, Rectangle blitPaint) Computes the parameters for a blit where the backing store image currently contains oldLoc in the upper left hand corner and we're scrolling to newLoc.
protected LayoutManager	createLayoutManager() Subclassers can override this to install a different layout manager (or null) in the constructor.
protected JViewport.ViewListener	createViewListener() Creates a listener for the view.
protected void	firePropertyChange(String propertyName, Object oldValue, Object newValue) Notifies listeners of a property change.
protected void	fireStateChanged() Notifies all ChangeListeners when the views size, position, or the viewports extent size has changed.
AccessibleContext	getAccessibleContext() Gets the AccessibleContext associated with this JViewport.
Dimension	getExtentSize() Returns the size of the visible part of the view in view coordinates.
Insets	getInsets() Returns the insets (border) dimensions as (0,0,0,0), since borders are not supported on a JViewport.
Insets	getInsets(Insets insets) Returns an Insets object containing this JViewports inset values.
int	getScrollMode() Returns the current scrolling mode.
ViewportUI	getUI() Returns the L&F object that renders this component.
String	getUIClassID() Returns a string that specifies the name of the L&F class that renders this component.
Component	getView() Returns the JViewports one child or null.
Point	getViewPosition() Returns the view coordinates that appear in the upper left hand corner of the viewport, or 0,0 if there's no view.
Rectangle	getViewRect() Returns a rectangle whose origin is getViewPosition and size is getExtentSize.
Dimension	getViewSize() If the view's size hasn't been explicitly set, return the preferred size, otherwise return the view's current size.
boolean	isBackingStoreEnabled() Deprecated. As of Java 2 platform v1.3, replaced by getScrollMode().
boolean	isOptimizedDrawingEnabled() The JViewport overrides the default implementation of this method (in JComponent) to return false.
void	paint(Graphics g) Depending on whether the backingStore is enabled, either paint the image through the backing store or paint just the recently exposed part, using the backing store to "blit" the remainder.
protected String	paramString() Returns a string representation of this JViewport.
void	remove(Component child) Removes the Viewports one lightweight child.
void	removeChangeListener(ChangeListener l) Removes a ChangeListener from the list that's notified each time the views size, position, or the viewports extent size has changed.
void	repaint(long tm, int x, int y, int w, int h) Always repaint in the parents coordinate system to make sure only one paint is performed by the RepaintManager.
void	reshape(int x, int y, int w, int h) Sets the bounds of this viewport.
void	scrollRectToVisible(Rectangle contentRect) Overridden to scroll the view so that Rectangle within the view becomes visible.
void	setBackingStoreEnabled(boolean enabled) Deprecated. As of Java 2 platform v1.3, replaced by setScrollMode().
void	setBorder(Border border) The viewport "scrolls" it's child (called the "view") by the normal parent/child clipping (typically the view is moved in the opposite direction of the scroll).
void	setExtentSize(Dimension newExtent) Sets the size of the visible part of the view using view coordinates.
void	setScrollMode(int mode) Used to control the method of scrolling the viewport contents.
void	setUI(ViewportUI ui) Sets the L&F object that renders this component.
void	setView(Component view) Sets the JViewports one lightweight child (view), which can be null.
void	setViewPosition(Point p) Sets the view coordinates that appear in the upper left hand corner of the viewport, does nothing if there's no view.
void	setViewSize(Dimension newSize) Sets the view coordinates that appear in the upper left hand corner of the viewport, and the size of the view.
Dimension	toViewCoordinates(Dimension size) Converts a size in pixel coordinates to view coordinates.
Point	toViewCoordinates(Point p) Converts a point in pixel coordinates to view coordinates.
void	updateUI() Notification from the UIFactory that the L&F has changed.

Methods inherited from class javax.swing.JComponent

addAncestorListener, addNotify, addPropertyChangeListener, addPropertyChangeListener, addVetoableChangeListener, computeVisibleRect, contains, createToolTip, disable, enable, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, fireVetoableChange, getActionForKeyStroke, getActionMap, getAlignmentX, getAlignmentY, getAutoscrolls, getBorder, getBounds, getClientProperty, getComponentGraphics, getConditionForKeyStroke, getDebugGraphicsOptions, getGraphics, getHeight, getInputMap, getInputMap, getInputVerifier, getListeners, getLocation, getMaximumSize, getMinimumSize, getNextFocusableComponent, getPreferredSize, getRegisteredKeyStrokes, getRootPane, getSize, getToolTipLocation, getToolTipText, getToolTipText, getTopLevelAncestor, getVerifyInputWhenFocusTarget, getVisibleRect, getWidth, getX, getY, grabFocus, hasFocus, hide, isDoubleBuffered, isFocusCycleRoot, isFocusTraversable, isLightweightComponent, isManagingFocus, isMaximumSizeSet, isMinimumSizeSet, isOpaque, isPaintingTile, isPreferredSizeSet, isRequestFocusEnabled, isValidateRoot, paintBorder, paintChildren, paintComponent, paintImmediately, paintImmediately, print, printAll, printBorder, printChildren, printComponent, processComponentKeyEvent, processFocusEvent, processKeyBinding, processKeyEvent, processMouseMotionEvent, putClientProperty, registerKeyboardAction, registerKeyboardAction, removeAncestorListener, removeNotify, removePropertyChangeListener, removePropertyChangeListener, removeVetoableChangeListener, repaint, requestDefaultFocus, requestFocus, resetKeyboardActions, revalidate, setActionMap, setAlignmentX, setAlignmentY, setAutoscrolls, setBackground, setDebugGraphicsOptions, setDoubleBuffered, setEnabled, setFont, setForeground, setInputMap, setInputVerifier, setMaximumSize, setMinimumSize, setNextFocusableComponent, setOpaque, setPreferredSize, setRequestFocusEnabled, setToolTipText, setUI, setVerifyInputWhenFocusTarget, setVisible, unregisterKeyboardAction, update

Methods inherited from class java.awt.Container

add, add, add, add, add, addContainerListener, countComponents, deliverEvent, doLayout, findComponentAt, findComponentAt, getComponent, getComponentAt, getComponentAt, getComponentCount, getComponents, getLayout, insets, invalidate, isAncestorOf, layout, list, list, locate, minimumSize, paintComponents, preferredSize, printComponents, processContainerEvent, processEvent, remove, removeAll, removeContainerListener, setLayout, validate, validateTree

Methods inherited from class java.awt.Component

action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, bounds, checkImage, checkImage, coalesceEvents, contains, createImage, createImage, disableEvents, dispatchEvent, enable, enableEvents, enableInputMethods, getBackground, getBounds, getColorModel, getComponentOrientation, getCursor, getDropTarget, getFont, getFontMetrics, getForeground, getGraphicsConfiguration, getInputContext, getInputMethodRequests, getLocale, getLocation, getLocationOnScreen, getName, getParent, getPeer, getSize, getToolkit, getTreeLock, gotFocus, handleEvent, imageUpdate, inside, isDisplayable, isEnabled, isLightweight, isShowing, isValid, isVisible, keyDown, keyUp, list, list, list, location, lostFocus, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, postEvent, prepareImage, prepareImage, processComponentEvent, processHierarchyBoundsEvent, processHierarchyEvent, processInputMethodEvent, processMouseEvent, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, repaint, repaint, repaint, resize, resize, setBounds, setBounds, setComponentOrientation, setCursor, setDropTarget, setLocale, setLocation, setLocation, setName, setSize, setSize, show, show, size, toString, transferFocus

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Field Detail

isViewSizeSet

protected boolean isViewSizeSet

True when the viewport dimensions have been determined. The default is false.

lastPaintPosition

protected Point lastPaintPosition

The last viewPosition that we've painted, so we know how much of the backing store image is valid.

backingStore

protected boolean backingStore

Deprecated. As of Java 2 platform v1.3

True when this viewport is maintaining an offscreen image of its contents, so that some scrolling can take place using fast "bit-blit" operations instead of by accessing the view object to construct the display. The default is false.

See Also:

setScrollMode(int)

backingStoreImage

protected transient Image backingStoreImage

The view image used for a backing store.

scrollUnderway

protected boolean scrollUnderway

The scrollUnderway flag is used for components like JList. When the downarrow key is pressed on a JList and the selected cell is the last in the list, the scrollpane autoscrolls. Here, the old selected cell needs repainting and so we need a flag to make the viewport do the optimized painting only when there is an explicit call to setViewPosition(Point). When setBounds is called through other routes, the flag is off and the view repaints normally. Another approach would be to remove this from the JViewport class and have the JList manage this case by using setBackingStoreEnabled. The default is false.

BLIT_SCROLL_MODE

public static final int BLIT_SCROLL_MODE

Use graphics.copyArea() to implement scrolling. This is the fastest for most applications.

See Also:

setScrollMode(int)

Since:

1.3

BACKINGSTORE_SCROLL_MODE

public static final int BACKINGSTORE_SCROLL_MODE

Draws viewport contents into an offscreen image. This was previously the default mode for JTable. This mode may offer advantages over "blit mode" in some cases, but it requires a large chunk of extra RAM.

See Also:

setScrollMode(int)

Since:

1.3

SIMPLE_SCROLL_MODE

public static final int SIMPLE_SCROLL_MODE

This mode uses the very simple method of redrawing the entire contents of the scrollpane each time it is scrolled. This was the default behavior in Swing 1.0 and Swing 1.1. Either of the other two options will provide better performance in most cases.

See Also:

setScrollMode(int)

Since:

1.3

Constructor Detail

JViewport

public JViewport()

Creates a JViewport.

Method Detail

getUI

public ViewportUI getUI()

Returns the L&F object that renders this component.

Returns:

ViewportUI object

setUI

public void setUI(ViewportUI ui)

Sets the L&F object that renders this component.

Parameters:

ui - the ViewportUI L&F object

See Also:

UIDefaults.getUI(javax.swing.JComponent)

updateUI

public void updateUI()

Notification from the UIFactory that the L&F has changed.

Overrides:

updateUI in class JComponent

See Also:

JComponent.updateUI()

getUIClassID

public String getUIClassID()

Returns a string that specifies the name of the L&F class that renders this component.

Overrides:

getUIClassID in class JComponent

Returns:

the string "ViewportUI"

See Also:

JComponent.getUIClassID(), UIDefaults.getUI(javax.swing.JComponent)

addImpl

protected void addImpl(Component child,
                       Object constraints,
                       int index)

Sets the JViewports one lightweight child, which can be null. (Since there is only one child which occupies the entire viewport, the constraints and index arguments are ignored.)

Overrides:

addImpl in class Container

Parameters:

child - the lightweight child of the viewport

constraints - the constraints to be respected

index - the index

See Also:

setView(java.awt.Component)

remove

public void remove(Component child)

Removes the Viewports one lightweight child.

Overrides:

remove in class Container

See Also:

setView(java.awt.Component)

scrollRectToVisible

public void scrollRectToVisible(Rectangle contentRect)

Overridden to scroll the view so that Rectangle within the view becomes visible.

Overrides:

scrollRectToVisible in class JComponent

Parameters:

contentRect - the Rectangle to display

setBorder

public final void setBorder(Border border)

The viewport "scrolls" it's child (called the "view") by the normal parent/child clipping (typically the view is moved in the opposite direction of the scroll). A non-null border, or non-zero insets, isn't supported, to prevent the geometry of this component from becoming complex enough to inhibit subclassing. To create a JViewport with a border, add it to a JPanel that has a border.

Note: If border is non-null, this method will throw an exception as borders are not supported on a JViewPort.

Overrides:

setBorder in class JComponent

Parameters:

border - the Border to set

Throws:

IllegalArgumentException - this method is not implemented

getInsets

public final Insets getInsets()

Returns the insets (border) dimensions as (0,0,0,0), since borders are not supported on a JViewport.

Overrides:

getInsets in class JComponent

Returns:

a Rectange of zero dimension and zero origin

See Also:

setBorder(javax.swing.border.Border)

getInsets

public final Insets getInsets(Insets insets)

Returns an Insets object containing this JViewports inset values. The passed-in Insets object will be reinitialized, and all existing values within this object are overwritten.

Overrides:

getInsets in class JComponent

Parameters:

insets - the Insets object which can be reused

Returns:

this viewports inset values

See Also:

getInsets()

isOptimizedDrawingEnabled

public boolean isOptimizedDrawingEnabled()

The JViewport overrides the default implementation of this method (in JComponent) to return false. This ensures that the drawing machinery will call the Viewports paint implementation rather than messaging the JViewports children directly.

Overrides:

isOptimizedDrawingEnabled in class JComponent

Returns:

false

paint

public void paint(Graphics g)

Depending on whether the backingStore is enabled, either paint the image through the backing store or paint just the recently exposed part, using the backing store to "blit" the remainder.

The term "blit" is the pronounced version of the PDP-10 BLT (BLock Transfer) instruction, which copied a block of bits. (In case you were curious.)

Overrides:

paint in class JComponent

Parameters:

g - the Graphics context within which to paint

reshape

public void reshape(int x,
                    int y,
                    int w,
                    int h)

Sets the bounds of this viewport. If the viewports width or height has changed, fire a StateChanged event.

Overrides:

reshape in class JComponent

Parameters:

x - left edge of the origin

y - top edge of the origin

w - width in pixels

h - height in pixels

See Also:

JComponent.reshape(int, int, int, int)

setScrollMode

public void setScrollMode(int mode)

Used to control the method of scrolling the viewport contents. You may want to change this mode to get maximum performance for your use case.

Parameters:

mode - one of the following values:

• JViewport.BLIT_SCROLL_MODE
• JViewport.BACKINGSTORE_SCROLL_MODE
• JViewport.SIMPLE_SCROLL_MODE

Since:

1.3

See Also:

BLIT_SCROLL_MODE, BACKINGSTORE_SCROLL_MODE, SIMPLE_SCROLL_MODE

getScrollMode

public int getScrollMode()

Returns the current scrolling mode.

Returns:

the scrollMode property

Since:

1.3

See Also:

setScrollMode(int)

isBackingStoreEnabled

public boolean isBackingStoreEnabled()

Deprecated. As of Java 2 platform v1.3, replaced by getScrollMode().

Returns true if this viewport is maintaining an offscreen image of its contents.

Returns:

true if scrollMode is BACKINGSTORE_SCROLL_MODE

setBackingStoreEnabled

public void setBackingStoreEnabled(boolean enabled)

Deprecated. As of Java 2 platform v1.3, replaced by setScrollMode().

If true if this viewport will maintain an offscreen image of its contents. The image is used to reduce the cost of small one dimensional changes to the viewPosition. Rather than repainting the entire viewport we use Graphics.copyArea() to effect some of the scroll.

Parameters:

enabled - if true, maintain an offscreen backing store

getView

public Component getView()

Returns the JViewports one child or null.

Returns:

the viewports child, or null if none exists

See Also:

setView(java.awt.Component)

setView

public void setView(Component view)

Sets the JViewports one lightweight child (view), which can be null.

Parameters:

view - the viewports new lightweight child

See Also:

getView()

getViewSize

public Dimension getViewSize()

If the view's size hasn't been explicitly set, return the preferred size, otherwise return the view's current size. If there is no view, return 0,0.

Returns:

a Dimension object specifying the size of the view

setViewSize

public void setViewSize(Dimension newSize)

Sets the view coordinates that appear in the upper left hand corner of the viewport, and the size of the view.

Parameters:

newSize - a Dimension object specifying the size and location of the new view coordinates, or null if there is no view

getViewPosition

public Point getViewPosition()

Returns the view coordinates that appear in the upper left hand corner of the viewport, or 0,0 if there's no view.

Returns:

a Point object giving the upper left coordinates

setViewPosition

public void setViewPosition(Point p)

Sets the view coordinates that appear in the upper left hand corner of the viewport, does nothing if there's no view.

Parameters:

p - a Point object giving the upper left coordinates

getViewRect

public Rectangle getViewRect()

Returns a rectangle whose origin is getViewPosition and size is getExtentSize. This is the visible part of the view, in view coordinates.

Returns:

a Rectangle giving the visible part of the view using view coordinates.

computeBlit

protected boolean computeBlit(int dx,
                              int dy,
                              Point blitFrom,
                              Point blitTo,
                              Dimension blitSize,
                              Rectangle blitPaint)

Computes the parameters for a blit where the backing store image currently contains oldLoc in the upper left hand corner and we're scrolling to newLoc. The parameters are modified to return the values required for the blit.

Parameters:

dx - the horizontal delta

dy - the vertical delta

blitFrom - the Point we're blitting from

blitTo - the Point we're blitting to

blitSize - the Dimension of the area to blit

blitPaint - the area to blit

Returns:

true if the parameters are modified and we're ready to blit; false otherwise

getExtentSize

public Dimension getExtentSize()

Returns the size of the visible part of the view in view coordinates.

Returns:

a Dimension object giving the size of the view

toViewCoordinates

public Dimension toViewCoordinates(Dimension size)

Converts a size in pixel coordinates to view coordinates. Subclasses of viewport that support "logical coordinates" will override this method.

Parameters:

size - a Dimension object using pixel coordinates

Returns:

a Dimension object converted to view coordinates

toViewCoordinates

public Point toViewCoordinates(Point p)

Converts a point in pixel coordinates to view coordinates. Subclasses of viewport that support "logical coordinates" will override this method.

Parameters:

p - a Point object using pixel coordinates

Returns:

a Point object converted to view coordinates

setExtentSize

public void setExtentSize(Dimension newExtent)

Sets the size of the visible part of the view using view coordinates.

Parameters:

newExtent - a Dimension object specifying the size of the view

createViewListener

protected JViewport.ViewListener createViewListener()

Creates a listener for the view.

Returns:

a ViewListener

createLayoutManager

protected LayoutManager createLayoutManager()

Subclassers can override this to install a different layout manager (or null) in the constructor. Returns a new ViewportLayout object.

Returns:

a LayoutManager

addChangeListener

public void addChangeListener(ChangeListener l)

Adds a ChangeListener to the list that is notified each time the view's size, position, or the viewport's extent size has changed.

Parameters:

l - the ChangeListener to add

See Also:

removeChangeListener(javax.swing.event.ChangeListener), setViewPosition(java.awt.Point), setViewSize(java.awt.Dimension), setExtentSize(java.awt.Dimension)

removeChangeListener

public void removeChangeListener(ChangeListener l)

Removes a ChangeListener from the list that's notified each time the views size, position, or the viewports extent size has changed.

Parameters:

l - the ChangeListener to remove

See Also:

addChangeListener(javax.swing.event.ChangeListener)

fireStateChanged

protected void fireStateChanged()

Notifies all ChangeListeners when the views size, position, or the viewports extent size has changed.

See Also:

addChangeListener(javax.swing.event.ChangeListener), removeChangeListener(javax.swing.event.ChangeListener), EventListenerList

repaint

public void repaint(long tm,
                    int x,
                    int y,
                    int w,
                    int h)

Always repaint in the parents coordinate system to make sure only one paint is performed by the RepaintManager.

Overrides:

repaint in class JComponent

Parameters:

tm - maximum time in milliseconds before update

x - the x coordinate (pixels over from left)

y - the y coordinate (pixels down from top)

width - the width

height - the height

See Also:

Component.update(java.awt.Graphics)

paramString

protected String paramString()

Returns a string representation of this JViewport. This method is intended to be used only for debugging purposes, and the content and format of the returned string may vary between implementations. The returned string may be empty but may not be null.

Overrides:

paramString in class JComponent

Returns:

a string representation of this JViewport

firePropertyChange

protected void firePropertyChange(String propertyName,
                                  Object oldValue,
                                  Object newValue)

Notifies listeners of a property change. This is subclassed to update the windowBlit property. (The putClientProperty property is final).

Overrides:

firePropertyChange in class JComponent

Parameters:

propertyName - a string containing the property name

oldValue - the old value of the property

newValue - the new value of the property

getAccessibleContext

public AccessibleContext getAccessibleContext()

Gets the AccessibleContext associated with this JViewport. For viewports, the AccessibleContext takes the form of an AccessibleJViewport. A new AccessibleJViewport instance is created if necessary.

Specified by:

getAccessibleContext in interface Accessible

Overrides:

getAccessibleContext in class JComponent

Returns:

an AccessibleJViewport that serves as the AccessibleContext of this JViewport